Inlet water requirements
PH: 2-11(Cleaning 2-12)
Temperature: 5-45℃
Turbidity: PVC ＜15NTU ,PVDF＜25NTU
Instantaneous Max.residual chlorine: 100ppm（less than10 min.）
Ozone concentration: ＜0.5mg/L
Grease amount: ＜2mg/L
Iron amount: ＜1mg/L
Undissolved solids amount: ＜0.5wt%
UF Running parameter
Control type: Mechanical power control／Mini controller/PLC ( touch screen option）
Recovery rate: ≥85%
Running types: Cross-flow/dead-end flow
Filtrate Flux @25C: PVC:35-100L/m2. 1bar.; PVDF:40-120L/m2. 1bar.
Inlet pressure: PVC ＜2bar ,PVDF＜1.5bar
Backwash pressure: ＜2bar
Pressure differential: PVC ＜2bar ,PVDF＜1.5bar
Cleaning pressure: PVC ＜2bar ,PVDF＜1.5bar
